|
|
|
|
This
easy-to-assemble wire shelving system puts space to
work practically anywhere. The units snap together without
tools – shelf grooves simply lock into uprights
at 5” (127mm) increments. Custom fit your wire
shelving units for any Full-size van, Mini van, Pickup
truck, Walk-in van or even the new Sprinter van.
|
| This
wire shelving has a very high ratio of strength to weight.
Each shelf level can support a uniformly distributed static
load of at least 600lbs. A full-size van can be fully
up fitted with storage space by adding as little as 200lbs
to your gross vehicle weight. All pieces are chrome plated
steel wire for maximum durability and good looks.
|
For
best performance – especially if shelves are likely
to be heavily loaded – it is recommended that:
• units over 50” high be assembled with no less
than three shelves, and preferable four or more, and that
the bottom shelf be placed as low as possible or practical.
• heaviest loads be stored at lower levels and lighter
loads at upper levels.
• shelving must be placed only on solid floors that are reasonably
level. |
| Modular
wire shelving is available in 12” and 18” depths
with lengths of 42”, 48” or 60”. Combination
units are available in lengths of 84”, 96” or
102”. Modular units and/or uprights can be ordered
in heights of 46”, 48” or 52” for your
full-size van. Walk-in and Sprinter vans can accommodate
heights of up to 72”. Please call us at 1-800-529-8302
for orders of special dimensions. |
| Completely
outfit your van with a van partition, ladder racks, freon
tank holders or other van shelving. |
